WS2 is produced by a number of methods, many of these methods involve treating oxides with sources of sulfide or hydrosulfide, supplied as hydrogen sulfide or generated in situ. Other routes entail thermolysis of tungsten(VI) sulfides (e.g., (R4N)2WS4) or the equivalent (e.g., WS3). WS2 is used, in conjunction with other materials, as catalyst for hydrotreating of crude oil.
The abstract of the article with the headline above was written by Paula Ussa Aldana. The research work focused on the utilization of tungsten disulfide as lubricant additives, which is a template for further research thesis.
Abstract: The growing environmental concerns, along with the continuous increase of energy demand, have encouraged research to improve energy efficiency in every technological field. In the transport industry, responsible of more than half of the world’s oil consumption, manufacturers have bet on hybrid fuel technologies, more aerodynamic car profiles, innovative tires and even downsizing of engines and gearboxes to reduce the weight of the vehicles to face the problem. However, according to VTT Technical Research Centre of Finland, in passenger cars one third of fuel consumption is due to friction loss. This means that several millions of liters of fuel are used every year to overcome friction around the world. As a consequence, reduction on the friction losses would have a direct impact in oil consumption. For this reason, research in the tribology field has specially focused in the development of low friction materials and more efficient lubricants. This work investigates the potential of metal dichalcogenide nanoparticles as lubricant additives for automobile applications with the aim of formulating more efficient lubricants. These nanoparticles which were synthetized for the first time in the 90’s have shown interesting tribological properties when added to base oil under specific laboratory test conditions. However, their future use in real-life mechanical systems needs a better comprehension of their behavior on rough surfaces and in the presence of additives commonly used in industrial lubricants.Industrially produced tungsten disulfide nanoparticles were used in this work. First of all, the industrial context of this work and the basis of tribology science in general and of tribology in the automotive industry in particular are exposed in the state of the art part. In this section, a literature review of the lubricating properties of laboratory scale produced metal dichalcogenides nanoparticles of tungsten and molybdenum disulfide is exposed. The effect of different conditions (temperature, concentration in oil, contact pressure, among others) is also presented in this first section. The research work done for this thesis is divided in two main parts. In the first one, the nanoparticles were first morphologically and chemically characterized and their tribological potential in base oil was investigated on smooth and rough surfaces under different test conditions. Then, their tribological behavior in the presence of additives that are commonly used in industrial applications, in the boundary lubrication regime and at 100°C was studied.In the second part, the use of nanoparticles for a gearbox application was explored. The potential of the nanoparticles in base oil and in the presence of a commercial package of additives for this application was studied, first at the laboratory scale, and then in scaled-up tests with gearboxes used in cars. The results suggest that nanoparticles can be used to increase life span of the mechanical parts of gears.
Get the full research work HERE
